Five-axis manipulators are now widely used in various industries, the rapid development of robots, and the rapid increase in the number of robots, so the demand is also very large, then we should pay attention to the following problems when using five-axis robots:

(1) When an abnormal situation occurs in the external power supply, the control system will send a message to remind the operator of this situation. In order to make all the systems work safely, it is necessary to set up a safety circuit externally and add a protection route to ensure the safe operation of the machine.

(2) Before installing, wiring, operating, and protecting the five-axis servo manipulator, familiarize yourself with the contents of the machine manual. It is also necessary to familiarize yourself with the mechanical and electronic knowledge safety precautions when using it. When the power is on, the mechanical and electronic fields are connected. The working principle is also more complicated. Under the premise of knowing how to work, the correct method of using the five-axis servo manipulator can be mastered, and any emergency situation can be handled correctly in time.

(3) The five-axis servo manipulator should be installed on flame retardant materials such as metal. Because the robot is an energized device, if it touches with combustible materials, it will produce severe chemical reactions. Therefore, pay special attention to whether the installation environment is far away from combustible materials and eliminate potential dangers.

(4) It is necessary to ground the five-axis servo manipulator when using it. The manipulator is a large-scale machine. The power consumption is also far above the ordinary electrical equipment. For the user's personal safety considerations, the grounding can minimize the accidental injury of the staff.

(5) It is necessary for the five-axis servo robot wiring work to be carried out by a professional electrician. The wiring is complicated, and it needs to be handled by professional electronic knowledge workers. The safety wiring is more guaranteed. The staff should stand in a safe position during operation. No one is allowed under the robot arm.

Knowing and knowing the problems that the five-axis manipulator should pay attention to is responsible for the safety of the operator and the serious attitude towards the machine. Therefore, it is necessary to know the problems that the five-axis manipulator should pay attention to.