Do the friends know about the fault detection and troubleshooting of the automatic paint sprayer? Let's explain the following An An Xiaobian pieces:

(1) First of all, it should be checked whether the automatic paint sprayer oil pump has oil, whether the air pressure and oil pressure valve are adjusted to a certain pressure, whether the oil circuit is blocked or cleaned, and the above problems are found to be solved in time.

elimination method:

Automatic paint sprayer price list Check whether the spray gun switch is high enough (usually adjusted to 3-4kg/cm2), press the start lance thimble to bounce; if it does not produce oil, clean the inside of the spray gun and the cap, pay attention to the spray gun The oil seal should not be immersed in corrosive liquid such as toluene to prevent deformation and damage, and pay attention to correct operation.

(2) The automatic painting machine spray paint machine does not move the mechanical arm.

elimination method:

1. Check whether the robot has an alarm signal, and ask the professional maintenance personnel to solve the alarm signal according to the alarm signal.

2. Press the robot back to the origin and observe whether there is a return to the original point and normal state.

3. The robotic servo motor of the automatic painting machine is loose and re-tightened.

4. If you find that the servo motor is faulty, please inform the manufacturer to repair.

(3) The basic knowledge of the automatic painting machine spray paint machine explains that the conveyor line does not move

elimination method:

1. Check if the inverter is started and the parameters are correct.

2. Whether the chain is stuck or broken

3. Whether the motor is running or not, whether the overload protection switch is reset

The above is the inspection and troubleshooting method of the spraying robot for everyone's answer. I hope to help everyone.